Best Bulb Planters In 2022

Need to plant multiple flower beds in the smallest amount of time possible? Then you might want to consider the Power Planter 100% USA Made 3”x7” Bulb & Bedding Plant Auger. It’s a great tool for homeowners with wide garden areas waiting to be planted. Without the stressful concerns of tediously digging holes with a shovel or other smaller hand tools, the Power Planter provides a much easier option. Instead of physically digging out holes, this tool practically and powerfully drills into the soil, creating 3-inch wide holes suitable for planting.

Instead of settling for shallow holes, the Power Planter drills into the soil deeply enough to provide seeds and plants the soil to root contact they need and deserve. It’s important to note that this auger comes without the drill, but works great with any 3/8-inch drill. It’s equally interesting that this power tool was made by smart family farmers, and has been helping so many other farmers/gardeners for more than 30 years.

Skip digging the hard way with hard tools that only cause strain, pain, and result in long labor hours. There’s a new and innovative way of digging up garden holes that requires less energy, pressure, and of course, less time. The UGarden Bulb & Bedding Plant Auger is made with durable, high-speed steel, well-finished with glossy green paint. This 16-inch auger reliably makes work a lot easier, providing extra-length for convenience and a sharp, pointy edge that quickly drives through the soil.

It also requires a regular cordless drill to operate, with absolutely no features that hold you back from loving that garden back to life. So, there’s no need to second-guess this reliable auger; it’s built to bore holes efficiently for hassle-free planting. What’s more, those veggie and flower bulbs will thank you in no-time for digging deep holes that allow them to have sufficient root to soil contact beneficial to their growth.

Fiskars has since become a household name for many who appreciate the high-quality products they let out. Established in 1649, they are actually one of the oldest companies in Finland. There’s one thing many of their loyal customers can commonly agree on; they haven’t dropped the ball since then. Ingeniously crafting the Fiskars Bulb Transplanter, they incorporated their famous orange signature on the handle, as a guarantee of their top-notch crafting skills.

As opposed to using a spade, garden fork, or ax, this bulb transplanter takes less time to bore a deep and appropriately wide hole. It is highly durable, long-lasting, and alongside other Fiskar products, built to fit the needs of its customers, especially permaculture gardeners. What’s more, if you plan on digging several holes, this bulb planter can get the job done without bending under pressure.

If you still love the feel of getting down low and digging holes in the soil, then the Flora Guard Bulb Planter would be a great option. It measures 4-inches long and 3.2-inches wide, perfect for those well-rounded holes for bulbs, seeds, or transplanting. Made with hardened steel, it’s sturdy enough to be used on soft, hard, or dry clay alike. It’s equally straightforward to use, with a sturdy yet comfortable handle that makes all the difference.

The anti-slip grip has a very smooth feel on the hands, that won’t leave blisters on the hands or fingers. And to ensure a smooth and stress-free operation, the handle is screwed on extra-tightly, establishing a firm hold on the body. Once the stainless steel mouth sinks into the soil, regardless of the texture or density, this bulb planter will solidly pull out the soil leaving a beautiful round hole for planting. It doesn’t matter if the ground is wet, the Flora Guard bulb planter does a great job at smoothly pulling out soil.

Technology has made a lot of things easier, from communication and advertising, to medical services, you name it! However, gardening is the one area that may seem a bit neglected since the big machines are mostly designed for commercial farming. With more farmers thinking of innovative ways to make basic chores and domestic gardening more manageable, we are seeing increased modernization when it comes to gardening tools.

The Ymachary Long Handled Bulb Planter Tools puts an end to long hours digging the grounds and planting. It requires relatively little effort, and users don’t even have to stress with squatting or bending to dig. What’s more, the long length allows healthy standing when digging holes, as well as a poke, squeeze, and pull operation. The good part is, this bulb planter goes beyond digging holes and equally acts as an efficient channel to plant seeds. So, users don’t have to bend down to plant anymore, simply dig out the hole, plant and cover the soil while standing.

We do like a multi-tasker at Gear Hungry and the ProPlugger certainly doesn’t disappoint! A five in one garden tool, you can bulb plant, weed, plug sow, fertilize and soil test with this hardworking dude. But as this is a best bulb planter review, how does the ProPlugger perform when it comes to specifically digging in your spring bulbs?

As a long-handled planter, it can take the strain out of all your bulb-planting needs, allowing you to work from a standing position and so saving you from unnecessary pain in your back or knees. It has a sturdy build, with the pole made from welded carbon steel, topped off with padded hand grips.  And we really like the easy to use design that, when it comes to digging those holes, is super quick. Simply push in, twist and pull and you’ll have an approximately two-inch hole ready to be planted. Control the depth of the hole using the depth ring to set it at a consistent 2, 4 or 6 inches then tip the tool upside down to empty out the retrieved soil and you’ll be good to go again. Although you will need to wipe out the plug chamber every so often as you dig to prevent clogging, its effective design means you can eat up the borders in no time, creating clean holes for your bulbs as well as your annual plants.

For tough ground or large bulb patches, this solid looking, short handled Edward Tools Bulb Planter won’t disappoint. Made from reinforced chrome-plated steel to prevent its body from bending even when hard pressed into compacted soil, this bulb planter is both reliable and quick to use.

The solid tube body digs deep into the soil, holding the dirt in place when you remove it and creating a decent space to plant your tulips, daffodils and other flower bulbs. The side of the planter also includes a depth marker from 1 to 4 inches to help you ensure consistent planting as you go. Once you have popped the bulb into its new home, simply squeeze the two sides of the handle together to release your soil back into the hole to cover your bulb, then pat down into place and move on. The coring system of the Edward Tools Bulb Planter also means you replace the soil as you took it out, with all the layers, including your top mulch dropping back into place. Neat.

Sometimes less is more, and that also counts for planting out and maintaining your garden. If simplicity and value for money is what you are really looking for when it comes to bedding in your new season bulbs, then check out this dibber from Zenport. First up, at less than £8 it is a great price and just the ticket for affordable and fuss-free gardening. Made from a lightweight plastic that is actually surprisingly sturdy once in the hand, the design is straightforward and super easy to use. A curved short handle sits nicely in the palm of your hand and enables a tight grip while the spike is sharp and long, perfect for manually puncturing holes in the ground.

With the Zenport Dibber this is bulb planting totally up close and personal – you will need to bend down or sit close to the soil and use your spare hand to pack the bulb, plug plant or seed into the narrow hole you have created. But it is minimally invasive and with its versatile spike size, can also be used for planting a host of other seeds and seedlings in your garden. You also get measurement units along the side of the spike so you can manage the depth of your hole, depending on the bulb or plant you are looking to bed in. There is a little give in the spike so you will need to be careful when using it in rocky or compacted ground. But as an everyday bulb planting tool that is really easy to use and keep clean, this is a great value addition to have ready and waiting in your garden tool shed. Find more great products like this by checking out our guide to the best garden fork.

Combining your DIY and gardening tool boxes, the Jisco Bulb Planter is a smart piece of kit which fits on most 3/8 inch or ½ inch electric drills to power down into the ground for easy bulb or seedling planting.

Made from a durable steel, the Jisco bulb planter comprises of a metal shaft with a spiral scoop blade that attaches to either a cordless or electric cabled drill to mechanically scoop out the soil with minimum effort. Whizz through your bulb planting chores with the Jisco, which drills 2 ¾ inch holes in the soil and allows you to go up to 8 inches deep, to suit the planting demands of your different bulbs. You can also use the Jisco bulb planting tool to plant in grass plugs, bedding plants or nursery stock seedings, meaning you can get a pretty impressive amount of planting done in even the shortest gardening session.

Drill bit bulb planters offer the easiest and quickest way to make a hole for planting. Leave the shovel, trowel, and manual bulb planters in the shed. You’re not going to need them now. This awesome Auger Drill Bit will make the perfect sized hole in seconds and all you have to do is press a button. It creates holes up to 14.6-inches deep and 1.8-inches wide, the perfect size for any small plant. 

Made from heavy-duty stainless steel, this drill attachment is built to dig into the earth countless times, without showing any signs of damage. It’s not going to rust, the glossy black paint isn’t going to crack, and it definitely won’t break if it hits something solid in the earth. In short, it’s built to last. 

The drill bit will work with any ⅜” or larger drill. They recommend using a drill that’s 18V or over but you could get away with anything as small as a 14V drill. If you find yourself constantly digging holes for new bulbs, this tool will cut down your work time dramatically. Plus, it will save your back from bending down so often, so it’s a win-win.